manualshive.com logo in svg

Chevrolet 2001 Express Van, Owner'S Manual

Share
Download
Chevrolet 2001 Express Van Owner'S Manual Download Page 200

4-8

Here’s how anti

-

lock works. Let’s say the road is wet.

You’re driving safely. Suddenly an animal jumps out in
front of you.

You slam on the brakes and continue braking. Here’s
what happens with ABS.

A computer senses that wheels are slowing down. If one
of the wheels is about to stop rolling, the computer will
separately work the brakes at each front wheel and at
both rear wheels.

The anti

-

lock system can change the brake pressure

faster than any driver could. The computer is
programmed to make the most of available tire and road
conditions. This can help you steer around the obstacle
while braking hard.

As you brake, your computer keeps receiving updates on
wheel speed and controls braking pressure accordingly.

Summary of Contents for 2001 Express Van





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands