11 of 11
*** Before calling Tech Service, please try to RESET the
Controller first. This will sometimes solve problems and is
an easy step to correcting the problem before calling Tech
Service. If the NIC is “locked-up”, this will usually work to get
the Controller functional again. Otherwise contact CCSI. ***
One way to RESET the controller is to press the RESET
button on the board (shown in the Mother Board diagram
on the “Wiring Diagrams” pages). If there is not a button,
there will be two pins; jump them together with the tip of a
flathead screwdriver and that will RESET the controller as
well. Another way of resetting it is by pressing 0 and F
simultaneously. The NIC will stop the present operation and
ask for a four-digit code. If you press
(7638)
, the NIC will
perform a software reset. All information will be lost,
including all setup information. If you press
(4273)
, the NIC
will perform a hardware reset. Again, all information will
be lost. If the wrong code is entered or E is pressed, the NIC
will resume operation where it left off.
Note:
Resetting this way is helpful if you are having
difficulty making the remote keypad respond.
TECHNICAL ASSISTANCE:
If you have any questions
regarding the use of this program or any other Cherry Creek
Systems Product please call us at …………………………………..
(719) 380-8373 ext. 206
OR
OR
OR
www.cherrycreeksystems.com