4
CHAP. 1 - RECEIVING THE MACHINE
1.1 - PACKAGE
The slicer is shipped in a package which consists of (Fig. n°1): cardboard box, wooden
pallets and protective nylon. They should be disposed of separately and according to the
norms in force in the country of installation.
Do not place more than one of the same
package on top (Fig. n°3).
WARNING!
Fig. n°1
Fig. n°2
Fig. n°3
B
A
C
Dimensions
AxBxC
(mm)
Gross
weight
(Kg)
V 350 VCS
870x840x830
71
V 350 BS2/BS3
870x840x830
73
V 370 VCS
870x840x830
72
V 370 BS2/BS3
870x840x830
74
V 385 VCS
870x840x830
74
V 385 BS2/BS3
870x840x830
75
21
6.2.4 - Cleaning the sliceguard
(Fig. n°52)
To remove the sliceguard simply grasp the
hand grip (1) and pull up so that the two
pins unhook (2), and then extract the slice-
guard.
At this point clean the sliceguard with warm
water, the equipped detergent or with neu-
tral detergent (pH 7).
extracted in the following way:
1. unhook the bladeguard (Fig. n°48);
2. take out the sharpening device (Fig. n°
50 rif.a);
3. unscrew the three or four screws (Fig. n°
50 ref.f), depending on the model, which
fasten the blade;
4. rest the jig (b) on the blade, so that the
split in the jig fits in the ring (Fig. n°50
ref.c);
5. match the axes of the two holes (Fig. n°
50 ref.d) on the blade with the twoknobs
(Fig. n°50 rif.e) on the jig, simply making
the blade turn to the desired position;
6. screw the two knobs (e) without e-
xcessively tightening them.
N.B. The bladeguard must be cleaned
with warm water, the equipped deter-
gente or with neutral detergent (pH 7).
6.2.3 - cleaning the greaseguard
The removal of the greaseguard is possi-
ble only if the graduated hand grip is in
the “0” position and the trolley has ben
removed.
The greaseguard can be easily transported
(Fig. n°51):
-
loosen the two knobs (1);
-
take out the greaseguard (2) by pulling in
the direction of the arrow (a);
-
clean the greaseguard with warm water,
the equipped detergent or with neutral
detergent (pH 7).
Fig. n°49
d
c
b
a
f
e
Fig. n°50
a
2
1
Fig. n°51
1
2
2
1
Fig. n°52
