8
As a memorandum we suggest filling in your machine data in the following box.
ATTENTION!
Do not, for any reason, alter
the data given on the plate.
1.7.1 - Safety and warning plates (fig. 1.7.2)
ATTENTION!
Do not intervene on electrical parts while the machine is connected to the power
supply.
Risk of electrocution.
Observe the warnings on the plates. Failure to observe them can cause se-
rious injury.
Make sure the plates are always fitted and readable. If not, fit or replace them.
Grater model…....…………
Serial N°………………….
Year of construction…………….
Type……………………………...
A = Grater model
B = Serial number
C = Motor power Watts
D = Amperes
E = Motor frequency Volts
F = Machine weight in Kg
G = Manufacturer
VOLT 230
VOLT 400
C
A
B
Fig. 1.7.1
A
B
C
Fig. 1.7.2
13
2.5.3 - 220 three-phase electrical diagram
KEY
A
= motor command card
M
= motor
L1, L2, L3
= three-phase line
Fig. 2.5.3
