16
5
Start up and stop
5.1 - Checking the correct electrical connection
ATTENTION!
Check that the feeding line corresponds to the value reported on the identification
plate of the machine and that it is outfitted with an efficient floor plug.
1. Put the plug into the electrical outlet.
2. Set the differential switch in position "I". The lit indicator “3” fig. 4.1.1, indicating
that the machine is powered, must be illuminated.
3. Press the pushbutton “2” fig. 4.1.1 to start and immediately afterwards press
the stop one “1” fig. 4.1.1, checking the rotation direction of the roller.
Note
The presser must be in a low position.
The roller rotation direction must be the same
as the one indicated by the arrow fig. 5.1.1
5.2 - Checking the presence and efficiency of protections and
safeties
Fig. 5.1.1
2
1
Fig. 5.2.1
5
1 Delivery and warranty
1.1 - Introduction
ATTENTION!
The purpose of the symbols used in this manual is to draw the reader’s attention to
points and operations that can endanger the personal safety of the operators or
risk damaging the machine.
Do not use the machine unless you are certain that you have correctly understood
these warnings.
ATTENTION!
For greater clarity some illustrations in this manual show the machine or parts of it
with the panels or carters removed.
Do not use the machine in such conditions; all protections must be correctly fitted
and in perfect working order.
This manual cannot be reproduced, even partially, and its contents cannot be used
for purposes other than those permitted by the manufacturer.
Any violations of the above will lead to punishment according to law
.
1.2 - How to keep and use this manual
The purpose of this manual is to instruct the user, through texts and figures, on
transport, handling, use, and maintenance of the machine; the manual must there-
fore be carefully read before using the machine. Carefully keep this manual near
the machine in an easily and quickly accessible place for future reference.
If the manual is misplaced or damaged, ask your dealer or manufacturer for a
copy.
If the machine is sold, inform the manufacturer of the name and address of the
new owner.
The manual reflects the state of technology at the moment the machine is sold and
cannot be considered inadequate if it is subsequently updated due to newly gained
knowledge.
In this regard the manufacturer reserves the right to update its products and ma-
nuals without being obliged to update previous products or manuals apart from
exceptional cases.
If in doublt consult the nearest servicing center or the manufacturer.
The manufacturer aims to continuously optimize its product.
For this reason any comments or suggestions on how to improve the product and/
or manual are welcome.
The machine has been delivered to the user under the warranty conditions in force
at the time of purchase.
Contact your supplier for any clarifications needed.
