Chef Pro CMG 615, Owner'S Manual, Page: 3 / 7

3 4
IMPORTANT NOTE:
If your mixer grinder stops due to overload, switch off the unit, reduce the contents in the jar,
remove the cause of overload and then push the reset button located at the bottom of the
mixer grinder. Before restarting the mixer grinder, wait for 2-3 minutes to allow the motor to
cool down.
Before first use – Carefully wash the jars with mild detergent and rinse before first and every
use.
It is recommended to run the appliance with warm soapy water in the jar, for 10-15 sec, after
using the jar, then rinse & dry thoroughly for trouble free performance of your Chef Pro® Mixer
Grinder.
Use with AC outlet. Do not use with DC outlet.
Technical Specifications:
Model : Chef Pro® CMG 615 / CMG617
Voltage : 110V AC, 60Hz
Power Consumption : 550 Watts / 750 Watts
Rating : 5 minutes
Motor : Universal Heavy Duty Dynamically Balanced
No load : Speed 18000 RPM (approx)
Material of Body : ABS
Material of Jars : Stainless Steel
No. of Jars : 3 jars (wet grinding, dry grinding and chutney)
Speed Controls : 3 Speeds with Pulse/whipper Switch
Flex Cord : PVC Approx. 1.8 Meters Long with 6 amps 3 Pin Plug
Over load Protector : 2.4 Amps Rating
Country of Origin : Made in India
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
STEP 1 - UNPACKING

Remove the contents from the box. Make sure no parts are missing.

Save the box and packing materials. You may want to use it later.
STEP 2 – OPERATING INSTRUCTIONS

Do not plug the Chef Pro® Mixer Grinder until the appliance is ready for operation.

Plug the appliance in to an electric A/C outlet.

Before fixing the attachments to the base unit rotate the coupler by hand to make sure that it
turns freely.
 Place and mount the jars firmly on the base unit.
 Place the food which has been cut into fairly sized pieces in the jar. Do not fill the jar
completely. Fill only half jar for optimum performance and long life of your Chef Pro® Mixer
Grinder.
 Secure the lid (Dome or Flat) with locking device before operating the mixer grinder.
 Do not burden motor with loads heavier than what is recommended.
 Wait until the blades have completely stopped before removing the cover. Mixer Grinder
should be unplugged before removing the cover.

If the appliance does not work, then there is a possibility of food being stuck under or
between the blade and jar. Remove excessive food and try again.
 You can stop the mixer grinder when the food is processed to your desired consistency.
 Remove and lift the jar. Place the jar on a flat surface. Now remove the processed food from
the jar with a spatula.
Note: Flat Lid / Chutney Lid of the jars must be held by hand during the operation.
STEP 3 – CLEANING INSTRUCTIONS

You must always unplug the appliance from the electric outlet before cleaning, before first
use and after every use, clean each part thoroughly.

It is essential to clean jars after every use with luke warm water to remove leftover food
especially sticky substances so that the shaft will not get jammed and will rotate freely. It is
recommended to run the appliance with warm soapy water in the jar, for 10-15 sec, after
using the jar, then rinse & dry thoroughly for trouble free performance of your Chef Pro®
Mixer Grinder.

Run empty jar for 5-10 seconds approx to make it totally dry to prevent rusting.

Wash Lid and gasket after every use.

Wipe power base unit with damp cloth.

Do not use abrasive cleaning pads or detergents.

Do not put the Mixer Grinder in the water or any other liquid or dishwasher.

Be extremely careful when handling the blade during cleaning, as the blade is very sharp, and
sharp objects can cut and cause bleeding.
 The jar, cover and accessories can also be washed with a detergent and then should be
allowed to dry on the draining tray.
Step 4 – Important Reminders
 Do not fill the jar more than half.
 Pause for 1 minute after every 2-3 minutes of use.
 Do not operate the appliance for more than 2-3 minutes continuously at a time.