Cheetah 64NEX, User Manual

Page: 47 / 66

Cheetah 64NEX Digital Video Router
Publication 81-9059-0685-0, Rev. A
March 2011
Proprietary Information of PESA 8-2
TABLE 8-1 Ethernet Configuration (cont.)
N
AME
U
SAGE
D
EFAULT
NETPRC Port Allows the specification of the TCP port
to be used by the NETPRC server. 1000
Read Community Specifies the read community string for
the SNMP agent. public
Write Community Specifies the write community string for
the SNMP agent. Private
Trap Community Specifies the trap community string for
the SNMP agent. public
Traps On/Off Enables or disables SNMP trap
generation.
Off
Authentication Traps
On/Off
Enables or disables SNMP
Authentication failure trap generation.
Off
Trap Target IP Specifies the IP address to receive SNMP
traps. 0.0.0.0
The configuration of these fields are accessed via the DB-9, RS-232 connector on the Matrix
Frame Controller. Communication parameters for this serial interface default to 38400 baud, no
parity, eight (8) data bits, and one (1) stop bit.
Upon connection to the serial interface (via a communications program such as HyperTerminal),
enter the command 'ET' (for Ethernet) at the '>' prompt. The current Ethernet settings will be
displayed (note that these settings are unavailable via the Telnet interface). For example,
>et
MAC address: 02:02:02:02:02:02
SERIAL #: AAAAAA000000001
DHCP : ON
IP address : 192.168.000.104
Subnet mask : 255.255.255.000
Def Gateway : 192.168.000.002
NETPRC : MASTER
NETPRC port
: 1000
TELNET : ON
TELNET port
: 23
TELNET pass :
RCOMM : public
WCOMM : private
TCOMM : public
TRAP
: OFF
AUTH : OFF
TARGET : 000.000.000.000
>