Cheetah 64NEX, User Manual

Page: 17 / 66

Cheetah 64NEX Digital Video Router
Publication 81-9059-0685-0, Rev. A
March 2011
Proprietary Information of PESA 4-5
4.6.1.2 Chassis AC External Power Requirements
The Cheetah router chassis is supplied with redundant, prefabricated, UL/CSA approved power
cords that include NEMA 5-15P male and IEC-60320-C13 female line connectors. These
cords are for connection to a 120VAC-supply service (refer to Table 4-1).
T
ABLE
4-1 AC Power Connectors
AC Power Cable
Minimum Amps
Required
IEC Pigtail Service Drops
IEC-type line cord (120VAC connectors) 10A Service Yes No
1-Standard
1-Redundant
This AC power filter assembly has been designed for 95-240VAC, which
includes connectors and cords specified to handle maximum power
requirements.
4.6.2 International Power Requirements
All Cheetah frames have two AC Main power feeds, which are isolated from each another. All
international power requirements are pre-configured at the factory and commercially available,
prefabricated power cords designed for the power source that the equipment will be operating are
supplied with each unit.
As in the United States, international operation with one power supply is the normal, non-option
condition. An optional second (redundant/backup) power supply is available. Typical full-frame
power consumption is approximately 6.0 Amps or approximately 650 Watts at 240 VAC nominal
regardless of the number of power supplies in use.
4.7 C
HEETAH
64NEX C
HASSIS
I
NPUT
/O
UTPUT
S
IGNAL
C
ONNECTORS
Each input or output card supports 16 video signals and installs to the rear of the 64NEX frame. I/O
card variants are available with BNC connectors or SFP fiber optic connectors. Figure 4-3
illustrates signal connections to each type of card. Use these illustrations as a guide when
completing video connections to the router.