the screen
4.3 Me
asurement modes
The coating thickness gauge has two different measurement modes, the single measurement (SI) and the
continuous measurement (CO). Long press
to enter the main menu. There, select the menu item
"Options" and move on to Mode, where you press .
USER MANUAL
6
mode to clear the recorded data.
(
Delete/Down
):
Press the
4.2
Line starting
Press the
to turn on the instrument.
A beep sounds and "Model no. PCE-CT 27FN" is displayed on
4.3.1
Single measurement
SI mode is the measurement mode of the single measurement:
Press the probe vertically against the surface to be measured. The unit will beep once and display the
coating thickness value when the readings have been taken.
Note
:
Do not pull the probe over the surface to be measured.
The screen will be shown in the next picture:
1025.0 µm
measured value
Average
605.3 µm
the average of all recorded data
Min. 49,6 µm
the smallest measured value
Max. 1025.0 µm
the highest measured value
in measurement
