Hardware Components
Check Point 61000 Security System Getting Started Guide R75.40VS for 61000 | 19
SSM160 Security Switch Module
Item Description
1
•
1 port for direct access through LAN
•
1 port for direct access through console (serial)
2
•
2 x 40GbE QSFP data ports.
In the initial setup program, the interface names are:
•
Left Security Switch Module:
eth1-09
,
eth1-13
•
Right Security Switch Module:
eth2-09
,
eth2-13
•
Use a QSFP splitter to split each of the two QSFP ports to 4 x 10GbE.
When using a QSFP splitter the interface names are:
•
Left Security Switch Module upper QSFP port:
eth1-09
to
eth1-12
•
Left Security Switch Module lower QSFP port:
eth1-13
to
eth1-16
•
Right Security Switch Module upper QSFP port:
eth2-09
to
eth2-12
•
Right Security Switch Module lower QSFP port:
eth2-13
to
eth2-16
3
•
7 x 10GbE SFP+ data ports
•
Can use 1GbE or 10GbE transceivers
•
In the initial setup program, the interface names are:
•
Left Security Switch Module:
eth1-01, eth1-02, ... eth1-07
•
Right Security Switch Module:
eth2-01, eth2-02, ... eth2-07
•
In SmartDashboard, define used interfaces as internal or external.
4
•
1 synchronization port for connecting to and synchronizing with another 61000
appliance that functions as a high availability peer.
•
10 GbE SFP+ port
•
Interface names are
eth1-Sync
in the left and
eth2-sync
on the right.
5
Management and logging ports. Connect these ports to the management/logging
network. Security Management Server or dedicated logging servers should be accessible
from these interfaces.
•
2x 10GbE SFP+ port
•
In the 61000 appliance initial setup program, these interfaces are labeled:
•
On the left SSM:
eth1-Mgmt1, eth1-Mgmt2
•
On the right SSM:
eth2-Mgmt1, eth2-Mgmt2
