Chauvin Arnoux C.A 1954 DiaCAm2, User Manual

Page: 6 / 42

6
1.2. Powering the camera

The camera accepts AA batteries of two types:
- either alkaline batteries
- or Ni-MH rechargeable batteries.

The latter must be recharged with an external charger.

When the batteries are withdrawn, the internal clock has
enough power for 15 hours.

The batteries are inserted through the end of the handle.

Open the cover using a coin while pressing down on the
locking tab:
1.3. Inserting the micro SD memory card
The files created by the camera (image, audio, and setup files)
are stored only on the micro SD memory card located on the
left side of the head.
If this card is missing, an error message appears as soon as
access to it becomes necessary.
The memory card must be formatted:
- either in FAT16 format,
- or in FAT32,
or it cannot be read.
To insert the card, open the rubber flap and push the card into
its slot. Refer to the diagram opposite.
Take care to insert it in the right direction.
If the card cannot be inserted:
- either it is in the wrong direction and must be turned
around;
- or there is already a card in the slot.
Micro SD memory card