44
6.2. SPECIFIC MODELS
AmpFlex
®
series A110 single-phase sensor
The sensors are available in specific lengths, from 50 cm to 10 m in 5‑cm increments.
The connecting cable between the sensor and the electronic unit is available in specific lengths, from
50 to 1000 cm in 10‑cm increments.
AmpFlex
®
series A110 three-phase sensor
The sensors are available in specific lengths, from 50 cm to 10 m in 5‑cm increments.
The connecting cable between the sensor and the electronic unit is available in specific lengths, from
50 to 1000 cm in 10‑cm increments.
The output can take the form of:
3 leads (from 50 cm to 300 cm long, in 10‑cm increments) with two stripped and tinned conductors
(instrument 600 V cat. III provided that a 600V cat. III connector is added on the conductors)
3 coaxial cables 50 cm long terminated by an insulated male BNC connector (instrument 600
V cat. III)
3 leads 50 cm long terminated by 2 insulated 4mm banana plugs, one red and one black
(instrument 600 V cat. IV)
The characteristics of the sensors will be identical to those of the A110 and A130, but the pass band will
be specified only up to 5 kHz.
The length of the cables may introduce further influences.
In all cases, for specific models, get in touch with our sales staff.
