Setup
COLORado™ Batten Quad-9 Tour User Manual Rev. 1
-7-
Power Linking
The COLORado™ Batten Quad-9 supports power linking. You can power link up to
9 products at 120 V, 14 products at 208 V, or 15 products at 230 V.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
DMX Linking
You can link the COLORado™ Batten Quad-9 Tour to a DMX controller using a standard
DMX serial connection. If using other DMX compatible products with the COLORado™
Batten Quad-9 Tour, you can control each individually with a single DMX controller.
DMX Modes
The COLORado™ Batten Quad-9 Tour uses the standard DMX data connection for its
TOUR
,
TR16
,
ARC.1
,
AR1.D
,
ARC.2
,
AR2.D
,
AR2.S
,
HSV
,
PIX1
,
PIX2
, and
HALO
DMX modes.
•
Refer to the
Introduction
section for a brief description of these modes.
•
Refer to the
Operation
section to learn how to configure the COLORado™ Batten
Quad-9 Tour to work in these modes.
•
The
DMX Values
section provides you with detailed information regarding the
DMX modes.
Master/Slave
Connectivity
The Master/Slave mode allows a COLORado™ Batten Quad-9 Tour (the “master”) to
control one or more products (the “slaves”) without a DMX controller.
One COLORado™ Batten Quad-9 Tour becomes the master product either when
running in static (
STAT
) mode or when using the automatic (
AT
) or customizable (
PR
)
programs.
In addition, you must configure each of the slaves (via their control panels) to operate in
Slave (
SLAV
) mode. During Master/Slave operation, the slaves will operate in unison
with the master.
For more information, see the
Menu Map
section.
Do not connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master product.
•
The
Operation
section of this manual provides detailed instructions on how to
configure the Master and Slave products.
•
If you need more information about DMX standards, Master/Slave connectivity, or
the DMX cables needed in order to link the product to a DMX controller, download
the
DMX Primer
from the CHAUVET® website:
www.chauvetpro.com
.
•
Verify the
DIMX
and
CURV
settings are set to
OFF
for optimal control of the TR16
personality. For more information, see
Menu Map
.
Summary of Contents for Quad-9
Page 1: ...User Manual ...
