Operation
COLORado™ Batten Quad-9 Tour User Manual Rev. 1
-13-
Program Upload
This option allows you to transfer the custom programs of one product onto another
product using the Master/Slave mode.
1. Configure and connect the products in a Master/Slave arrangement, where the
master has the custom programs you want to transfer to the slaves.
2. From the master, go to the
SET
main level.
3. Go to the
UPLD
programming level.
4. Enter the passcode (see
Passcode
).
5. When
SEND
shows, press
<ENTER>
to start the upload.
6. Wait for the upload process to finish (the display will show
OK
before continuing or
turning the products off.
The Master/Slave products will provide the status of the process by lighting up as
follows:
•
Yellow indicates that the upload process is running.
•
Green indicates that the upload process completed successfully.
•
Red indicates that the upload process failed due to an error. Recheck all cable
connections and restart the process. If the issue persists, contact CHAUVET®
Technical Support.
Do not upload the data from a COLORado™ Batten Quad-9 Tour to a different
product, as the other product may become inoperative.
Resetting Factory
Defaults
This setting allows you to reset the product’s default values, including the custom
programs.
1. Go to the
SET
main level.
2. Select
REST
.
3. Enter the passcode (see
Passcode
).
4. Wait for the reset process to finish.
Summary of Contents for Quad-9
Page 1: ...User Manual ...
