Obey™ 70 User Manual Rev. 5 ML
Page
7
of
40
Safety Notes
•
Please keep this User Manual for future consultation. If you sell the unit to
another user, be sure that they also receive this manual.
•
Always make sure that you are connecting the product to the proper voltage,
and that the line voltage you are connecting to is not higher than that stated on
the sticker or rear panel of the fixture.
•
This product is intended for indoor use only! To prevent risk of fire or shock, do
not expose fixture to rain or moisture.
•
Make sure there are no flammable materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20
″
(50 cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.
•
Always disconnect from power source before servicing or replacing fuse and be
sure to replace with same fuse source.
•
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at
temperatures higher than this.
•
In the event of a serious operating problem, stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center.
•
Never connect the device to a dimmer pack.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling on the cord.
•
Avoid direct eye exposure to the light source while it is on.
2. Introduction
Product Overview
Please read these instructions carefully. It includes important
information about the installation, usage, and maintenance
of this product.
Scene Selection Buttons
Chase Selection Buttons
LCD Display
Mode Modification Area
Speed Time Fader
Fade Time Fader
Fixture Selection Buttons
Page Selection Button
Strobe Button
Fog Button
X/Y Joystick
Summary of Contents for Obey 70
Page 1: ...User Manual ...
