Page
14
of
40
Obey™ 70 User Manual Rev. 5 ML
7. Technical Information
Maintenance
To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned at least twice a month. Dust build-up
reduces light output performance and can cause overheating. This can lead to
reduced lamp life and increased mechanical wear. Be sure to power off fixture before
conducting maintenance.
•
Unplug fixture from power.
•
Use a vacuum or air compressor and a soft brush to remove dust collected on
external vents.
•
Clean all lenses when the fixture is cold with a mild solution of glass cleaner or
Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue.
•
Apply solution to the cloth or tissue and drag dirt and grime to the outside of the
lens.
•
Gently polish optical surfaces until they are free of haze and lint.
Always dry the parts carefully after cleaning them.
Never spin a fan using compressed air.
Technical
Specifications
Dimensions and
Weight
Length
Width
Height
Weight
19 in (483 mm) 7 in (178 mm) 2.8 in (71 mm) 7.3 lbs (3.3 kg)
Note:
Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
External power supply 100~240 V, 50/60 Hz Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
<1 W
<1 W
Operating/Inrush
current
0.2 A
0.2 A
DMX Refresh Rate
25 Hz
Thermal
Maximum External Temp.
104° F (40° C)
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
384
Ordering
Product Name
Item Code
Item Number
Obey™ 70
09080234
OBEY70
Summary of Contents for Obey 70
Page 1: ...User Manual ...
