Setup
Nexus™ 4x1 User Manual Rev. 3
-13-
Mounting
Orientation
Rigging
Before mounting the Nexus™ 4x1, review the
Safety Notes
section, and read and follow the
guidelines below Nexus™ 4x4
•
Mount so there is access to the control panel.
•
Mount in a way that allows ventilation around the panel.
•
Do not mount near flammable materials as indicated in the
Safety Notes
section.
•
Do not mount in rain, high humidity, extreme temperature changes.
•
Make sure that the mounting structure can support the weight of the Nexus™ 4x1. See
Technical Specification
for information on weight.
•
Always use a safety cable.
The Nexus™ 4x1 can be mounted in any orientation as long as each individual panel is
secured through the mounting bracket. Always mount the Nexus™ 4x1s securely and use
safety cables.
The Nexus™ 4x1 includes a hanging bracket with holes for M12 compatible bolts. There are
coffin locks on all four edges of the Nexus™ 4x1, but these are not load bearing. They are for
aligning the panels in an array The coffin locks should not carry the weight of the Nexus™
4x1. Each Nexus™ 4x1 must be rigged to hold its own weight using the hanging bracket and
at least one point per panel.
The hanging bracket can be bolted directly onto a surface, or be connected to truss with
clamps. For a complete lines of CHAUVET® clamps, see the Chauvet website at
www.chauvetlighting.com
.
