Intimidator™ Scan/Barrel 305 IRC User Manual Rev. 1
Page 24 of 27
5.
T
ECHNICAL
I
NFORMATION
Product
Maintenance
Dust build-up on the lens reduces light output. Dust build-up on the body and fans can
cause overheating and mechanical wear, which can reduce the usable life of the product.
To maintain optimum performance and minimal wear in a normal environment, clean the
product at least twice a month. If the environment is particularly dusty, clean the product
more often.
For best results follow the suggestions listed below:
1. Never clean the product when it is plugged into a power source.
2. Only clean the product when it is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external surfaces and in the vents.
4. Use a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol to clean all
the external optics and glass or transparent surfaces.
5. Apply the cleaning solution directly to a soft, lint-free cotton cloth or a lens cleaning
tissue.
6. Gently wipe dirt and grime to the outside edges of the external optics and glass or
transparent surfaces.
7. Gently polish the external optics and glass or transparent surfaces until they are free of
haze and lint.
Always dry the external optics and glass/transparent surfaces carefully after cleaning
them.
Do not spin the cooling fans while blowing compressed air into them.
Summary of Contents for Intimidator Barrel 305 IRC
Page 1: ...User Manual...