Intimidator™ Scan/Barrel 305 IRC User Manual Rev. 1
Page 19 of 27
Configuration
(Standalone)
Use standalone configurations to operate the product without a DMX controller.
Never connect a product operating in a standalone mode (Sound, Auto, or IR) to a
DMX chain that includes a DMX controller. Products in standalone mode can transmit
DMX signals that interfere with the DMX signals from the controller
Sound Mode
Sound mode sets the product to respond to sounds and music.
To set the product to Sound mode, do the following:
1. Make sure the product is connected to a power source and not connected to a DMX
controller.
2. Press
<MENU>
repeatedly until 4 icons show on the display.
3. Use
<UP>
or
<DOWN>
to highlight the
Run Mode
icon.
4. Press
<ENTER>
and the
Run Mode
options will show on the display.
5. Use
<UP>
or
<DOWN>
to highlight the
Sound
option.
6. Press
<ENTER>
. A green dot will show on the
Sound
option line and the product will
begin reacting to sound.
The product will respond only to low frequencies of music (bass and drums).
If the product is not responding to sound, increase the sensitivity. For more
information see the
Sensitivity Setting
below.
Auto Mode
Auto mode sets the product to 1 of 16 preset movement patterns and color changes.
To set the product to Auto mode, do the following:
1. Make sure the product is connected to a power source and not connected to a DMX
controller.
2. Press
<MENU>
repeatedly until 4 icons show on the display.
3. Use
<UP>
or
<DOWN>
to highlight the
Run Mode
icon.
4. Press
<ENTER>
and the
Run Mode
options will show on the display.
5. Use
<UP>
or
<DOWN>
to highlight the
Auto
option.
6. Press
<ENTER>
. A green dot will show on the
Auto
option line and the product will
begin moving and emitting light.
Manual Mode
Manual mode allows the user to control every function of the Intimidator™ Scan/Barrel 305
IRC through the LCD display. To run the product in Manual mode, follow the instructions
below:
1. Make sure the product is connected to a power source and not connected to a DMX
controller.
2. Press
<MENU>
repeatedly until 4 icons show on the display.
3. Use
<UP>
or
<DOWN>
to highlight the
Run Mode
icon.
4. Press
<ENTER>
and the
Run Mode
options will show on the display.
5. Use
<UP>
or
<DOWN>
to highlight the
Manual
option.
6. Press
<ENTER>
and the
Manual
options will show on the display.
7. Use
<UP>
or
<DOWN>
to select
Pan
,
Tilt
,
P/T Speed
,
Color
,
Dimmer
,
Shutter
,
Gobo
,
Gobo Rotate
,
Prism
,
Special Function
, or
P/T Macro
.
8. Press
<ENTER>
and the current value (
000–255
) of the selected function will be
highlighted.
9. Use
<UP>
or
<DOWN>
to increase or decrease the value of the selected function.
10. Press
<ENTER>
.
11. Repeat steps 7–10 until the product is set as desired.
Summary of Contents for Intimidator Barrel 305 IRC
Page 1: ...User Manual...