Intimidator™ Scan/Barrel 305 IRC User Manual Rev. 1
Page 21 of 27
Reset
Resetting will restart the product. It does not change any settings. Resetting is a helpful
troubleshooting tool, and can be used if the product has stopped responding to control, or if the
control system has suffered a failure.
To reset the product, do the following:
1. Press
<MENU>
repeatedly until 4 icons show on the display.
2. Use
<UP>
or
<DOWN>
to highlight the
Setup
icon.
3. Press
<ENTER>.
The
Setup
options will show on the display.
4. Use
<UP>
or
<DOWN>
to highlight the
Reset
option.
5. Press
<ENTER>
. The product will immediately reset.
Reset to Factory
Defaults
Resetting to factory defaults will clear out all customized settings and return thee settings to the
factory defaults. Resetting to factory defaults can be used if the product is behaving
inconsistently.
To reset the product to factory default settings, do the following:
1. Press
<MENU>
repeatedly until 4 icons show on the display.
2. Use
<UP>
or
<DOWN>
to highlight the
Setup
icon.
3. Press
<ENTER>
. The
Setup
options will show on the display.
4. Use
<UP>
or
<DOWN>
to highlight the
Factory Set
option.
5. Press
<ENTER>
. The product will immediately reset to factory default settings.
System
Information
To see the product’s current software version, running mode, DMX address and temperature, do
the following:
1. Press
<MENU>
repeatedly until 4 icons show on the display.
2. Use
<UP>
or
<DOWN>
to highlight the
Sys Info
icon.
3. Press
<ENTER>
. The current information about the product will show on the display.
Summary of Contents for Intimidator Barrel 305 IRC
Page 1: ...User Manual...