Intimidator™ Scan/Barrel 305 IRC User Manual Rev. 1
Page 22 of 27
IR Mode
IR mode allows the product to be controlled with an infrared remote controller. The IRC-6
can remotely set the product to various modes; adjust the color, speed and sensitivity; and
set the strobe.
To set the product to IR mode, do the following:
Make sure the product is plugged into a power source and not connected to a DMX cable.
1. Press
<MENU>
repeatedly until 4 icons show on the display.
2. Use
<UP>
or
<DOWN>
to highlight the
Run Mode
icon.
3. Press
<ENTER>.
The
Run Mode
options will show on the display.
4. Use
<UP>
or
<DOWN>
to highlight the
IR
option.
5. Press
<ENTER>.
A green dot will show on the
IR
option line and the product will begin
moving and emitting light.
IRC-6 Operation
The IRC-6 infrared controller (available from Chauvet) allows remote control of the
Intimidator™ Scan/Barrel 305 IRC.
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
between the remote and the product.
Some of the buttons on the remote work differently than what is indicated on their
labels. For example:
•
<MANUAL> controls the gobo selection.
•
<R>, <G>, <B>, <A>, <UV>, and <W> control the other manual functions.
Please read the next section carefully.
The list below describes which features each button controls.
•
<BLACKOUT>
- Turns LEDs on and off.
•
<AUTO>
- Activates Auto mode. Use the
<+>
and
<->
buttons to cycle through Auto
modes.
•
<SOUND>
- Activates Sound mode.
•
<STROBE>
- Activates the strobe. Use the
<+>
and
<->
buttons to cycle through strobe
speeds.
•
<SPEED>
- Adjusts the movement speed. Use the
<+>
and
<->
buttons to cycle through
movement speeds.
•
<SENSITIVITY>
- Adjusts sound sensitivity. Use the
<+>
and
<->
buttons to cycle
through sound sensitivity levels.
•
<%>
- Adjusts the brightness of the LEDs. Use the
<+>
and
<->
buttons to increase or
decrease the brightness of the LEDs.
•
<MANUAL>
- Cycle through static gobos.
•
<FADE/SNAP>
or
<FADE>
- Cycle through static colors.
•
<R>
- Sets the color wheel rotation speed. Use the
<+>
and
<->
buttons to increase or
decrease the color wheel rotation speed.
•
<G>
- Sets the gobo wheel rotation speed. Use the
<+>
and
<->
buttons to increase or
decrease the gobo wheel rotation speed.
•
<B>
- Sets
CG. AUTO
mode. Colors and gobos will cycle automatically.
•
<A>
- Sets
R/T PAN/TILT
. Press
<A>
to toggle
PAN
and
TILT
. Use the
<+>
and
<->
buttons to increase or decrease the selected value.
•
<W>
- Sets the prism value. Use the
<+>
and
<->
buttons to increase or decrease the
prism value.
•
<+>
- Increases values for controls as described above.
•
<->
- Decreases values for controls as described above.
•
<0>
–
<9>
- Activates specific Auto modes. Can be used as a shortcut for the
combination of the
<AUTO>
button and the
<+>
and
<->
buttons.
•
<UV>
or
<P>
- Has no function with this product.
Summary of Contents for Intimidator Barrel 305 IRC
Page 1: ...User Manual...