Chauvet GEYSER P4, User Manual

Page: 8 / 19

Page 8 of 19 Geyser P4. User Manual Rev. 2
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the
Safety Notes .
Orientation
Primarily, the Geyser P4 is to be floor mounted in a vertical fog jet orientation.
Alternatively, it may also be mounted in a floor mounting/horizontal fog jet orientation or
in an overhead mounting/downward fog jet orientation; however, be sure to follow
instructions closely to avoid tank spills with alternate mountings.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product
for maintenance and fluid replenishment.
•
Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the
Technical Specifications ).
•
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
•
When rigging the product onto a truss, you should use mounting clamps of
appropriate weight capacity. Two threaded mounting holes (size M12) are on the
bottom of the product, which are appropriate for this purpose.
•
The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Fluid Tank
Position
To avoid spillage with any mounting, always position the fluid tank with the tank’s
cap in the uppermost position above the tank’s fluid line.
When mounting the Geyser P4 in any inverted position, remove the fluid tank from
the holder and set it upright on an adjacent surface.
Vertical Fog Jet
Horizontal Fog Jet
Fluid Line