Chauvet GEYSER P4, User Manual

Page: 12 / 19

Page 12 of 19 Geyser P4. User Manual Rev. 2
4. O
PERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU> Selects an operation mode or to backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Menu Map
Mode Programming Steps Description
DMX Addr d_ _1 – d 503 Selects DMX starting Address
Manual Color
Program
nCoL
P 0
(blackout)
Color program off (default) for
<
MANUAL > button
P1 –P32
Selects preset colors for < MANUAL >
button
Wireless Color
Program
CH-1 –
CH-4
P1-1–P1-32
Selects preset color program for wireless
remote operation
Temperature
Gauge
Ht T _ _ _ Shows current temperature of product
The Geyser P4 Wireless Remote Control buttons 1–4 trigger the options set in the
color programs CH-1–CH-4, respectively.
DMX Personality
and Starting
Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Geyser P4 uses up to 10 DMX channels in a 10CH DMX mode, which defines the
highest configurable address to
503 .
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com .
To select the starting address, do the following:
1. Press
<MENU> repeatedly until Addr shows on the display.
2. Press <ENTER> and d 1–503 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER> .
DMX Linking The Geyser P4 works with a DMX controller. Information about DMX is in the CHAUVET
DMX Primer,
which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf .
Configuration
(DMX)
Set the product in DMX mode ( Addr ) to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.