Page 4 of 19
Geyser P4. User Manual Rev. 2
Safety Notes
These notes include important information about the mounting, usage, and maintenance
of this product; read before using the product.
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
•
Always disconnect the product from the power source before cleaning or replacing
the fuse.
•
Avoid direct eye exposure to the light source while the product is on.
•
Make sure the power cord is not crimped or damaged.
•
Never disconnect the product from power by pulling or tugging on the cord.
•
If mounting the product overhead, always secure to a fastening device using a
safety cable.
•
Make sure there are no flammable materials close to the product when operating.
•
Do not touch the product’s housing when operating because it may be very hot.
•
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper,
carton, plastic, etc.).
•
The product’s nozzle is very hot during operation and it remains hot for a long time
after operation has stopped.
•
The fog exits the nozzle at a very high temperature. Keep a minimum distance of
6.5 ft (2 m) from the nozzle to the nearest object.
•
Do not use the product as a space heater.
•
Do not drink or become in contact with the fog fluid. If you do, call your local
emergency service (911 in the US) for help.
•
Do not add perfume, alcohol, gasoline, or any other flammables to the fog fluid.
•
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or panel of the product.
•
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
•
Always install the product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
•
Be sure that no ventilation slots on the product’s housing are blocked.
•
Make sure there is adequate fog fluid in the machine to prevent pump and heater
damage.
•
Never connect the product to a dimmer.
•
Make sure to replace the fuse with another of the same type and rating.
•
Never carry the product by the power cord or any moving part. Always use the
handles.
•
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
•
In the event of a serious operating problem, stop using the product immediately.
•
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
•
This product is not intended for permanent installation.
•
Use only CHAUVET® water-based fog fluid.
•
Drain the tank before transporting the product.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product to another user, be sure to
give this document to the next owner.
Fog Cleaner Quart (FCQ) was specifically developed by Chauvet to clean your Geyser
P4 Make sure you use FCQ regularly, no longer than 90 days between cleanings, to
increase the life of your fogger.
The Geyser P4 was specifically designed for use with CHAUVET® Quick Dissipating
Fluid (QDF). For optimum performance with your fogger, Chauvet recommends using
QDF.
Summary of Contents for GEYSER P4
Page 1: ...User Manual ...
