Chauvet BEAMbar User Manual Download Page 18

 
 
 
 

Page 18 of 18 

BEAMbar™ User Manual (Rev. 1) 

 

To return a product or request support: 

  In the U.S., contact CHAUVET® World Headquarters (see below). 

  In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below). 

  In any other country, DO NOT contact CHAUVET®. Contact your distributor. See 

www.chauvetlighting.com

 for distributors outside the U.S., United Kingdom, or 

Ireland. 

 

 

 

If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of 
record and follow their instructions on how to return CHAUVET® products to 
them. Visit our website for contact details. 

 

 

Returns 

Call the corresponding CHAUVET®  Technical  Support office and request a Return 
Merchandise Authorization (RMA) number before shipping the product. Be prepared to 
provide the model number, serial number, and a brief description of the cause for the 
return. 

You must send the merchandise prepaid, in its original box, and with its original packing 
and accessories. CHAUVET® will not issue call tags. 

Clearly label the package with the RMA number. CHAUVET®  will refuse any product 
returned without an RMA number. 

 

 

 

Write the RMA number on a properly affixed label. DO NOT write the RMA number 
directly on the box. 

 

 

 

Before sending the product,  clearly write the following information on a piece of paper 
and place it inside the box: 

 

Your name 

 

Your address 

 

Your phone number 

 

The RMA number 

 

A brief description of the problem 

Be sure to pack the product  properly. Any shipping damage resulting from inadequate 
packaging will be your  responsibility.  FedEx  packing or double-boxing  are 
recommended. 

 

 

 

CHAUVET®  reserves the right to use its own discretion to repair or replace 
returned product(s). 

 

 

Contact Us

 

World Headquarters 

CHAUVET® 

General Information

 

Address: 

5200 NW 108th Avenue 

 

Sunrise, FL 33351 

Voice:  

(954) 577-4455 

Fax:  

(954) 929-5560 

Toll free:  

(800) 762-1084 

United Kingdom & Ireland 

CHAUVET® Europe Ltd. 

General Information 

 

Address:  

Unit 1C 

 

Brookhill Road Industrial Estate 

 

Pinxton, Nottingham, UK 

 

NG16 6NT 

Voice:  

+44 (0)1773 511115 

Fax:  

+44 (0)1773 511110 

 

Technical Support

 

Voice:  

(954) 577-4455 (Press 

4

Fax:  

(954) 756-8015 

Email:  

[email protected]

 

Technical Support

 

Email:  

[email protected]

 

 

 

World Wide Web 

 

www.chauvetlighting.com

 

World Wide Web 

 

www.chauvetlighting.co.uk

 

 

Summary of Contents for BEAMbar



















Reviews: