BEAMbar™ User Manual (Rev. 1)
Page 15 of 18
Dimmer Speed
You can set the dimmer speed to fast, middle, slow, or off.
To select the dimmer speed, do the following:
1. Press
<MENU>
repeatedly until
diMd
shows on the display.
2. Press
<ENTER>
and
diM1
,
diM2
,
diM3
, or
oFF
shows on the display.
3. Use
<UP>
or
<DOWN>
to select
diM1
(fast speed),
diM2
(middle speed),
diM3
(slow speed), or
oFF
(dimmer speed off).
4. Press
<ENTER>
.
Display
Background
Light
You can select the amount of time the display’s background light stays on after control
panel inactivity.
To select the time for the display’s background light, follow the instructions below:
1. Press
<MENU>
repeatedly until
Led
shows on the display.
2. Press
<ENTER>
and
30S
,
20S
,
10s
, or
on
shows on the display.
3. Use
<UP>
or
<DOWN>
to select
30S
(off after 30 seconds),
20S
(off after 20
seconds),
10S
(off after 10 seconds), or
on
(remains on).
4. Press
<ENTER>
.
Information
With the BEAMbar™ you can access information on the product’s use.
To access this information, do the following:
1. Press
<MENU>
repeatedly until
InFo
shows on the display.
2. Press
<ENTER>
and
test
,
ver
, or
FhrS
shows on the display.
3. Use
<UP>
or
<DOWN>
to select
test
(runs a self-test),
ver
(shows the currently
installed software version), or
FhrS
(shows running time in hours).
4. Press
<ENTER>
.
