BEAMbar™ User Manual (Rev. 1)
Page 13 of 18
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (Static,
Automatic, or Sound) to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Show Mode
(Sound-Active
Programs)
To enable the Sound-Active programs, do the following:
1. Press
<MENU>
repeatedly until
ShMd
shows on the display.
2. Press
<ENTER>
and
Sh 0
–
Sh12
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the desired Sound-Active program.
4. Press
<ENTER>
.
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity
To set the sound sensitivity, do the following:
1. Press
<MENU>
repeatedly until
SenS
shows on the display.
2. Press
<ENTER>
and
0
–
100
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the desired sound sensitivity.
4. Press
<ENTER>
.
Automatic Mode
and Speed
To select the Automatic mode and set the automatic program speed, follow the
instructions below:
1. Press
<MENU>
repeatedly until
Auto
shows on the display.
2. Press
<ENTER>
and
Au 1
–
Au12
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the desired automatic program.
4. Press
<ENTER>
and
S 0
–
S100
(slow to fast) shows on the display.
5. Use
<UP>
or
<DOWN>
to select the desired automatic program speed.
6. Press
<ENTER>
.
