create step 2.
Continue to program until you have your desired sequence. Up to 8 steps may be programmed. When you are done, press the program
button again. The ART-16CON will begin to playback the program just created.
Program Playback
Saved programs can be replayed by pressing the program button and then the number of the program you wish to play. The ART-16CON
will flash the LEDs for all programs that have been created. If the LEDs do not flash then that location is empty.
In playback mode it is possible to set the time that each program step lasts (includes time during change). Press the time button and select
one of the buttons marked 5 seconds to 60 min. Then press the program button to select the program. The ART-16CON will retain the last
selected time in memory until it is changed.
Auto Programs
The ART-16CON controller contains 8 preset programs. These programs cannot be erased or altered. To play an automatic program, press
the auto button and then press one of the 8 program buttons. The time for each step can also be set using the procedure explained above.
Clear Memory
In order to return the controller to the default settings, press and hold the white button for about 20 seconds. The LEDs will flash. Continue
to hold the button until the flashing stops. CAUTION This procedure will clear the memory of all user entered presets and programs.
Lockout
The ART-16CON controller has a programming lockout feature. Press and hold down the save button for about 15 seconds. This will lock
the controller preventing anything from being saved. To unlock, repeat the procedure.
Features
• 8 Programmable Presets
• 8 Programmable Programs
• 8 Factory Presets
• 8 Factory Set Auto programs
• Adustable Time per Step 5 seconds to 60 minutes
Specifications
• Weight - 1.3 lbs
• Size - 6.25 x 4.5 x 3 in
• Two-gang Wall Mount
Packages:
ART-16CCPACK
ART-16CC2
Contains:
Contains:
4 pcs ART-16 CC Mirage Downlighters
2 pcs ART-16CC Mirage Downlighters
4 pcs 6-conductor 25 ft RJ11 cable (linking)
2 pcs 6-conductor 25 ft RJ11 cable
1 pc 4-conductor 100 ft RJ11 cable (to controller)
1 pc ART-PS2 power supply
1 pc ART-DRI Driver
1 pc ART-16CON Controller
3 pcs ART-16PS2 power supply
