background image

10

Intelect® Mobile Ultrasound

INDICATIONS

Application of therapeutic deep heat for the treatment of selected 
sub-chronic and chronic medical conditions such as:

• 

Relief of pain, muscle spasms and joint contractures

• 

Relief of pain, muscle spasms and joint contractures that may 

be associated with:

• 

Adhesive capsulitis

• 

Bursitis with slight calcification

• 

Myositis

• 

Soft tissue injuries

• 

Shortened tendons due to past injuries and scar tissues

• 

Relief of sub-chronic and chronic pain and joint contractures 

resulting from:

• 

Capsular tightness

• 

Capsular scarring

CONTRAINDICATIONS

• 

This device should not be used for symptomatic local pain relief 

unless etiology is established or unless a pain syndrome has 

been diagnosed.

• 

This device should not be used when cancerous lesions are 

present in the treatment area.

• 

This device should not be used when open wounds are present 

in the treatment area.

• 

This device should not be used on patients suspected of 

carrying serious infectious disease and or disease where it is 

advisable, for general medical purposes, to suppress heat or 

fevers.

• 

This device should not be used over or near bone growth 

centers until bone growth is complete.

• 

This device should not be used over the thoracic area if the 

patient is using a cardiac pacemaker.

• 

This device should not be used over a healing fracture.

• 

This device should not be used over or applied to the eye.

• 

This device should not be used over a pregnant uterus.

• 

This device should not be used on ischemic tissues in individuals 

with vascular disease where the blood supply would be unable 

to follow the increase in metabolic demand and tissue necrosis 

might result.

ADDITIONAL PRECAUTIONS

Additional precaution should be used when the ultrasound is used 
on patients with the following conditions:

• 

Over an area of the spinal cord following a laminectomy, 

i.e., when major covering tissues have been removed.

• 

Over anesthetic areas.

• 

On patients with hemorrhagic diatheses.

ABOUT ULTRASOUND THERAPY

Summary of Contents for Intelect Mobile Ultrasound
































































Reviews: