4
SAFETY PRECAUTIONS
Hydrocollator® Heating Units
ATTENTION: Refer to Instruction Manual/Booklet
Type B equipment
Explanation of Symbols
Thermostat Intensity Control
WARNING
Risk of explosion if used in the presence of flammable anesthetics .
•
Grounding the Hydrocollator SS, SS-2, E-1, E-2, M-2, and M-4 Heating Units:
Make certain the unit is electrically grounded by
plugging into a hospital grade electrical outlet with a ground terminal receptacle (U-ground outlet) . Follow the National Electrical
Code .
•
The water temperature in the Hydrocollator Heating Unit is approximately
160° F (71° C), and the water scalding temperature is
approximately
120° F (49° C) .
•
Care must be taken when operating the Hydrocollator Heating Unit adjacent to or stacked with other equipment . Potential
electromagnetic or other interference could occur to this or other equipment . Try to minimize this interference by not using other
equipment in conjunction with it .
•
The Hydrocollator Heating Unit should be placed on a smooth, level surface . The surface should support up to the Filled Weight
(weight of heating unit filled with water) found in Technical Specifications pages 8-10 of this manual .
•
Use only accessories that are specially designed for the Hydrocollator Heating Unit . Do not use accessories manufactured by other
companies on the Hydrocollator Heating Unit . DJO, LLC is not responsible for any consequence resulting from using products
manufactured by other companies . The use of other accessories or cables may result in increased emissions or decreased immunity
of the Hydrocollator Heating Unit .
•
Periodically inspect unit for signs of damage and pitting during regular cleaning intervals, as described in maintenance portion of
this manual . Contact service if any signs of damage are discovered .
•
DO NOT apply HotPac
directly to skin .
•
Individuals with circulatory problems should consult with a physician before using this product .
•
DO NOT sit or lie on the HotPac .
•
DO NOT add chlorine additive to water .
•
DO NOT allow HotPac to come in contact with hydrocarbons (e .g ., Comet®, Soft Scrub®, etc .) .
