3D ActiveTrac
®
28
Back
Pressing Back returns to the previous screen. Press Back if you
wish to change a selection on a previous screen.
OpErATiON
TOuChSCrEEN CONTrOL pANEL (TCp) (CONTiNuEd)
TIME/FORCE SET SCREEN
The Time Force Set Screen allows you to set the time and
maximum force for the treatment. This is the last set-up screen.
After the treatment time and maximum force have been set,
pressing Start starts the treatment.
Heading
The heading on this screen will correspond to the treatment
mode you previously selected (Cervical or Lumbar; Static or
Intermittent).
Treatment Time Set
The Treatment Time Set option allows you to enter the number
of minutes of treatment. Ramp Up and Ramp Down time is
not included. For example, if you set a treatment time of 10
minutes, and had previously set a ramp up time of 2 minutes
and a ramp down time of 1 minute, the total time will be 13
minutes, but only 10 minutes will display on the Treatment
Display Screen. Any hold and rest times set for Intermittent
mode will cycle on and off during the 10 minute treatment
time. No Intermittent cycling occurs during the ramp up and
ramp down phases.
TREATMENT DISPLAY SCREEN
