Chattanooga Group Intelect Legend XT 2760 User Manual Download Page 46

Page: 46 / 99

Intelect Legend XT® Therapy System

OPERATION

ULTRASOUND (CONTINUED)

Set intensity by rotating the Intensity Control

Knob to the prescribed level.

Setting Ultrasound Intensity

INTENSITY

DISPLAYED

ROTATE

INTENSITY

KNOB

Clockwise-

Increases Intensity

Counterclockwise-

Decreases Intensity

Intensity Knob Rotation

Starting Treatment

Press the Start button to begin therapy

session.
Move the Applicator in a circular motion

over the treatment area.

Pausing Treatment

Press the Pause button to pause therapy

session and maintain remaining time. To

resume treatment, press the Pause button

again.

NOTE:

The Applicator LED will not illuminate

when the session has been paused.

NOTE:

When the Applicator LED is

illuminated, the Applicator is

emitting Ultrasound.

START

BUTTON

PAUSE

BUTTON

Summary of Contents for Intelect Legend XT 2760




































































































Search results

Summary of Contents for Intelect Legend XT 2760

Reviews:

Related manuals for Intelect Legend XT 2760

Brands by name

Popular brands

Chattanooga Group Intelect Legend XT 2760, User Manual

Search results

Summary of Contents for Intelect Legend XT 2760

Reviews:

Related manuals for Intelect Legend XT 2760

Brands by name

Popular brands