Chattanooga Group Intelect Legend XT 2760 User Manual Download Page 11

Page: 11 / 99

Intelect Legend XT® Therapy System

ABOUT INTELECT LEGEND XT

Stimulation should not be applied over the anterior neck or mouth.

Severe spasm of the laryngeal and pharyngeal muscles may occur

and the contractions may be strong enough to close the airway or

cause difficulty in breathing.
Stimulation should not be applied transthoracically in that the

introduction of electrical current into the heart may cause cardiac

arrhythmia.
Stimulation should not be applied over swollen, infected, and

inflamed areas or skin eruptions, e.g., phlebitis, thrombophlebitis,

varicose veins, etc.
Stimulation should not be applied over, or in proximity to, cancerous

lesions.
Output current density is related to electrode size. Improper

application may result in patient injury. If any question arises as to

the proper electrode size, consult a licensed practitioner prior to

therapy session.
The Intelect Legend XT Therapy System optional modules and associated

accessories are designed for use only with the Chattanooga Group

Intelect Legend XT Electrotherapy and Combination Therapy Systems.

•

Summary of Contents for Intelect Legend XT 2760




































































































Search results

Summary of Contents for Intelect Legend XT 2760

Reviews:

Related manuals for Intelect Legend XT 2760

Brands by name

Popular brands

Chattanooga Group Intelect Legend XT 2760, User Manual

Search results

Summary of Contents for Intelect Legend XT 2760

Reviews:

Related manuals for Intelect Legend XT 2760

Brands by name

Popular brands