background image

Support 

 

17

TCM Operation Manual

„„„„

„

CONTACT US

United Kingdom

Tel +44 (0)1243 833 370

test[email protected]

France

Tel +33 (0)1 30 68 89 40

general.lloyd-instruments 
@ametek.c
om

Germany

Tel +49 (0)2159 9136 510

[email protected]

Denmark

Tel +45 4816 8000

test[email protected]

USA

Florida

Tel +1 (800) 527 9999

test[email protected]

India

Tel +91 22 2836 4750

test[email protected]

China

Shanghai

Tel +86 21 5868 5111

Beijing

Tel +86 10 8526 2111-19

 

test[email protected]

Singapore

Tel +65 6484 2388

test[email protected]

„„„„

„

RETURNING PRODUCT TO AMETEK

Please contact your sales representative to complete a Return Material Authorization (RMA) form and/or receive an RMA number.  
Return/shipping instructions will be provided with the RMA number.

„„„„

„

WARRANTY

This instrument is warranted against defects in workmanship, material and design for two (2) years from date of delivery to the extent that AMETEK will, at its 
sole option, repair or replace the instrument or any part thereof which is defective, provided, however, that this warranty shall not apply to instruments subject-
ed to tampering or, abuse, or exposed to highly corrosive conditions. 

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED AND AMETEK HEREBY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, 
WITHOUT LIMITATION, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. AMETEK SHALL NOT BE LIABLE FOR ANY INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, ANY ANTICIPATED OR LOST PROFITS. 

This warranty is voidable if the purchaser fails to follow any and all instructions, warnings or cautions in the instrument’s Operation Manual. 

If a manufacturing defect is found, AMETEK will replace or repair the instrument or replace any defective part thereof without charge; however, AMETEK’s obli-
gation hereunder does not include the cost of transportation, which must be borne by the customer. AMETEK assumes no responsibility for damage in transit, 
and any claims for such damage should be presented to the carrier by the purchaser.

Summary of Contents for TCM Series






















Reviews: