Chassis Plans
CPR-30201 KVM Technical Reference
Page
29
Going Directly to a Port
Hotkey
Action
[ScrollLock][ScrollLock][n][Enter]
Brings the KVM, USB hub, and audio
focus to the computer attached to the
port corresponding to the specified Port
ID.
Note that the KVM, USB hub, and audio
focus all go to this port even if they
were on different ports to begin with.
[ScrollLock][ScrollLock][n][K][Enter]
Brings only the KVM focus to the
computer attached to the specified port.
The USB hub and audio focus remain
where they are.
[ScrollLock][ScrollLock][n][U][Enter]
Brings only the USB hub focus to the
computer attached to the specified port.
The KVM and audio focus remain
where they are.
[ScrollLock][ScrollLock][n][S][Enter]
Brings only the audio focus to the
computer attached to the specified port.
The KVM and USB hub focus remain
where they are.
[ScrollLock][ScrollLock][n][K][U][Enter]
Brings the KVM and USB hub focus to
the computer attached to the specified
port. The audio focus remains where it
is.
[ScrollLock][ScrollLock][n][K][S][Enter]
Brings the KVM and audio focus to the
computer attached to the specified port.
The USB hub focus remains where it is.
[ScrollLock][ScrollLock][n][U][S][Enter]
Brings the USB hub and audio focus to
the computer attached to the specified
port. The KVM focus remains where it
is.
Note
: The
n
stands for the computer’s Port ID number (1, 2, 3, or 4-see Port Numbering). Replace the
n
with the
appropriate Port ID when entering hotkey combinations.
Auto Scanning
The KVMS-RGBA4‘s Auto Scan feature automatically cycles the KVM focus through the computer ports at regular
intervals. This allows you to monitor the computer activity without having to take the trouble of switching from port
to port manually.
See
the table below for details.
Note
:
The
n
stands for the number of seconds that the KVMS-RGBA4 should dwell on a port before moving on to
the next. Replace the
n
with a number between 1 and 99 when entering this hotkey combination.