Chassis Plans
CPR-30201 KVM Technical Reference
Page
37
Starting the Upgrade
To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file -either by double clicking the file icon, or by opening
a command line and entering the full path to it.
2.
The Firmware Upgrade Utility Welcome screen appears:
Note:
The screenshots in this section are for example purposes. The screens that appear during your firmware
upgrade may vary slightly as to their wording and descriptions.
1. Read and Agree to the License Agreement (enable the I Agree radio button).
2. Click Next to continue. The Firmware Upgrade Utility main screen appears:
3. The Utility inspects your installation. All the devices capable of being upgraded by the package are
listed in the Device List panel.
4. As you select a device in the list, its description appears in the Device Description panel.
5. After you have made your device selection(s), Click
Next
to perform the upgrade. If you enabled Check
Firmware Version, the Utility compares the device’s firmware level with that of the upgrade files. If it
finds that the device’s version is higher than the upgrade version, it brings up a dialog box informing
you of the situation and gives you the option to Continue or Cancel.
