Chassis Plans
CPR-30201 Technical Reference
Page
4
Installation
To mount the CPR-30201 in a rack, it is first important you identify the correct holes to mount to. Please see the
following illustration. Note that a ‘U’ starts between the holes that are ½” apart. One very common problem is
trying to install into the wrong holes.
For most rack mount equipment, you can install the fixed rails in the rack and then slide the chassis into those rails.
However, the CPR-30201 is an integrated unit and must be installed completely assembled. This is much easier if
two people do the installation, one in front and one in back.
Because there are multiple styles of racks, we can’t provide detailed instructions on mounting the equipment.
However, there are general instructions at
http://www.chassis-plans.com/PDF/Rack_Slide_Use.pdf
for rack
installation which should help.
Rack Mounting Hole Spacing
The rack ears are widely adjustable. The display depth is 30.25” plus connectors. The ears provide for 2 10-32
screws on each ear.