Chassis Plans CPC1-17, -19 Technical Reference
Chapter 7 – 16-Port VGA KVM Programming
Page 36
F1: GOTO
Clicking the
F1
field or pressing
[F1]
activates the GOTO function. GOTO allows you to switch directly to a port
either by keying in the port's
Name
, or its
Port ID
.
To use the name method, key in
1
; key in the port's
Name
; then press
[Enter]
.
To use the port ID method, key in
2
; key in the
Port ID
; then press
[Enter]
.
Note:
You can key in a partial name or port ID. In that case, the screen will show all the computers that the user
has
View
rights to (see
SET ACCESSIBLE PORTS
), that match the name or port ID pattern, regardless of
the current list settings (see
F2 LIST
for details).
To return to the OSD main screen without making a choice, press
[Esc]
.
F2: LIST
This function lets you broaden or narrow the scope of which ports the OSD displays on the main screen. The
submenu choices and their meanings are given in the table below.
Choice
Meaning
ALL
Lists all of the ports on the installation that have been set accessible by the administrator for the
current logged in user.
QUICK VIEW Lists only the ports that have been selected as quick view ports (see
SET QUICK VIEW PORTS
).
POWERED
ON
Lists only the ports that have their attached computers powered on.
QUICK VIEW
+ POWERED
ON
Lists only the ports that have been selected as quick view ports (see
SET QUICK VIEW)
and that
have their attached computers powered on.
Table 20 – F2: List Function
Move the highlight bar to the choice you want, then press
[Enter]
. An icon appears before the choice to indicate
that it is the currently selected one.
