Chassis Plans CCIR -17 Technical Reference
Chapter 7 – LCD Operation & OSDs
Page 36
Position
Autosetup*
Auto adjust the positions, phase, frequency
Yes
No
Frequency*
Adjust the image horizontal size
Phase*
Fine tune the data sampling position (adjust image quality)
Image Horizontal
Position*
Use +/- to move the image horizontally
Press – or + (- + )
Image Vertical
Position*
Use +/- to move the image vertically
Press – or + (- + )
Exit
Exit the OSD menu
Utilities
OSD setting
OSD Timeout : 0 / 10 / 20 / 30 / 40 / 50 / 60 seconds (Always on when set to 0)
Press – or + (- + )
OSD menu horizontal position
Press – or + (- + )
OSD menu vertical position
Press – or + (- + )
Load Factory Default
Initialize the setting stored in non-volatile memory
Sharpness
Adjust sharpness level
Press – or + (- + ) Total : 7 steps
Exit
Exit the OSD menu
Exit the OSD menu
Table 11 - LCD Controller OSD Menus
