manualshive.com logo in svg

Chassis Plans ATXP-965Q, Technical Reference

Share
Download
Chassis Plans ATXP-965Q Technical Reference Download Page 74

Appendix D – Flash BIOS Programming & POST Codes 

ATXP-965Q Technical Reference  

66  

Chassis Plans 

D7 

Restore CPUID value back into register.  The Boot block-Runtime interface module is 
moved to system memory and control is given to it.  Determine whether to execute serial 
flash.   

D8 

The Runtime module is uncompressed into memory.  CPUID information is stored in 
memory. 

D9 

Store the Uncompressed pointer for future use in PMM.  Copying Main BIOS into 
memory.  Leaves all RAM below 1MB Read-Write including E000 and F000 shadow areas 
but closing SMRAM. 

DA 

Restore CPUID value back into register.  Give control to BIOS POST 
(ExecutePOSTKernel).  See POST Code Checkpoints section of document for more 
information. 

DC 

System is waking from ACPI S3 state 

E1-E8 
EC-EE 

OEM memory detection/configuration error. This range is reserved for chipset vendors & 
system manufacturers. The error associated with this value may be different from one 
platform to the next. 

 

Table B-2 Boot block Recovery Code Checkpoints  

The Boot block recovery code gets control when the BIOS determines that a BIOS recovery needs to 
occur because the user has forced the update or the BIOS checksum is corrupt. The following table 
describes the type of checkpoints that may occur during the Boot block recovery portion of the BIOS:  

 

Checkpoint Description 

E0 

Initialize the floppy controller in the super I/O.  Some interrupt vectors are initialized.  DMA 
controller is initialized.  8259 interrupt controller is initialized.  L1 cache is enabled.   

E9 

Set up floppy controller and data.  Attempt to read from floppy. 

EA 

Enable ATAPI hardware.  Attempt to read from ARMD and ATAPI CDROM. 

EB 

Disable ATAPI hardware.  Jump back to checkpoint E9. 

EF 

Read error occurred on media.  Jump back to checkpoint EB. 

F0 

Search for pre-defined recovery file name in root directory. 

F1 

Recovery file not found. 

F2 

Start reading FAT table and analyze FAT to find the clusters occupied by the recovery file. 

F3 

Start reading the recovery file cluster by cluster. 

F5 

Disable L1 cache. 

FA 

Check the validity of the recovery file configuration to the current configuration of the flash 
part.   

FB 

Make flash write enabled through chipset and OEM specific method.  Detect proper flash 
part.  Verify that the found flash part size equals the recovery file size. 

F4 

The recovery file size does not equal the found flash part size. 

FC 

Erase the flash part. 

Summary of Contents for ATXP-965Q

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands