Chapter 3 – AMIBIOS Setup
ATXP-965Q Technical Reference
40
Chassis Plans
►
Boot Settings Configuration
Quick Boot
Disabled
Set this value to allow the BIOS to perform all POST tests.
Enabled
Set this value to allow the BIOS to skip certain POST tests to boot faster.
Quiet Boot
Disabled
Set this value to allow the computer system to display the POST messages
Enabled
Set this value to allow the computer system to display the OEM logo
Add-On ROM Display Mode
Force BIOS
Set this value to allow the computer system to force a third party BIOS to
display during system boot
Keep Current
Set this value to allow the computer system to display the configuration
information during system boot
Boot up Num-Lock
Off
This option disables the keyboard Number Lock automatically
On
Set this value to allow the Number Lock on the keyboard to be enabled
automatically when the computer system is boot up
PS/2 Mouse Support
Disabled
This option will prevent the PS/2 mouse port from using system resources and
will prevent the port from being active. Use this setting if installing a serial
mouse
Enabled
Set this value to allow the system to use a PS/2 mouse. This is the default
setting
Wait for ‘F1’ If Error
Disabled
This prevents the board from waiting on an error for user intervention. This
setting should be used if there is a known reason for a BIOS error to appear. An
example would be a system administrator must remote boot the system. The
computer system does not have a keyboard currently attached. If this setting is
set the system will continue to boot up in to the operating system. If ‘F1’ is
enabled
Enabled
Set this value to allow the system BIOS to wait for any error. If an error is
detected pressing <F1> will enter Setup and the BIOS setting can be adjusted
to fix the problem. This normally happens when upgrading the hardware and
not setting the BIOS to recognize it. This is the default setting.
