ATXN-5520 / WTM7026 Technical Reference
Advanced Setup
5-13
Chassis Plans
IDE Device Setup
When you select one of the IDE devices from the
IDE Configuration
screen, a Setup screen similar to the
following displays:
IDE Device Screen
When you display the IDE Device subscreen, the format is similar to the sample shown above. The data
displayed on the top portion of the screen details the parameters detected by AMIBIOS for the specified
device and may not be modified. The data displayed on the bottom portion of the screen may be modified.
The drive information; which displays the first time the BIOS Setup Utility is run, indicates the drive(s) on
your system which AMIBIOS detected upon initial bootup.
IDE
D
EVICE
S
ETUP
O
PTIONS
The following options are available for each of the IDE devices on the primary and secondary IDE
controllers:
Type
This option allows you to specify what type of device is on the IDE controller.
The Setup screen displays the system option:
Type [Auto]
Main
| Advanced | PCIPnP
Boot
Security
Chipset
Exit
Secondary IDE Master
Device :
Hard Disk
Vendor :
Hitachi HDS721680PLA380
Size :
80.0GB
LBA Mode :
Supported
Block Mode:
16Sectors
PIO Mode :
4
Async DMA :
MultiWord DMA-2
Ultra DMA :
Ultra DMA-5
S.M.A.R.T.:
Supported
Type
[Auto}
LBA/Large Mode
[Auto]
Block (Multi-Sector Transfer)
[Auto]
PIO Mode
[Auto]
DMA Mode
[Auto]
S.M.A.R.T.
[Auto]
32Bit Data Transfer
[Disabled]
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc
.
Select the type of
device connected to
the system.
←→ Select Screen
↑↓
Select Item
+-
Change Field
F1
General Help
F10
Save and Exit
ESC Exit
BIOS SETUP UTILITY
