ATXN-5520 / WTM7026 Technical Reference
Advanced Setup
5-9
Chassis Plans
IDE Configuration
When you select
IDE Configuration
from the Advanced Setup Menu, a Setup screen similar to the
following displays:
IDE Configuration Screen
When you display the IDE Configuration screen, the format is similar to the sample shown above.
Highlight the option you wish to change and press
<Enter>
to display the available settings. Select the
appropriate setting and press
<Enter>
again to accept the highlighted value.
Some of the options on this screen allow you to continue to subscreens designed to change parameters for
that particular option. Highlight the option you wish to change and press
<Enter>
to proceed to the
appropriate subscreen.
IDE
C
ONFIGURATION
O
PTIONS
The descriptions for the system options listed below show the values as they appear if you have not run the
BIOS Setup Utility program yet. Once values have been defined, they display each time the BIOS Setup
Utility is run.
SATA#1 Configuration
The Setup screen displays the system option:
SATA#1 Configuration [Compatible]
Main
| Advanced | PCIPnP
Boot
Security
Chipset
Exit
IDE Configuration
SATA#1 Configuration
[Compatible]
Configure SATA#1 as
[IDE]
SATA#2 Configuration
[Enhanced]
> Primary IDE Master
[Not Detected]
> Primary IDE Slave
[Not Detected]
> Secondary IDE Master [Hard Disk]
> Secondary IDE Slave
[Not Detected]
> Third IDE Master
[Not Detected]
> Fourth IDE Master
[Not Detected]
Hard Disk Write Protect
[Disabled]
IDE Detect Time Out (Sec)
[35]
ATA(PI) 80Pin Cable Detection
[Host & Device]
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc
.
Options
Disabled
Compatible
Enhance
←→ Select Screen
↑↓
Select Item
+-
Change Field
F1
General Help
F10
Save and Exit
ESC Exit
BIOS SETUP UTILITY
