20994124 REV A
49
Figure 29: Sequentially recorded Alarm
6.3
Clearing the Alarm Messages
There are several ways to inform an alarm to the user. First, an auditable sound starts
along with a dialog box popup message in the middle of the screen when a parameter is
out of it default range. The same time, same message is stored under the alarm tab for
user to observe them
later (
Figure 29
).
Buzzer will stop after 30 seconds. The popup
message can be cleared by pressing the “close” button appeared on the right hand corner
of the message. To clear all the messages in the “Alarms” tab, hit once on the icon given
in the bottom- right corner of the window.
6.4
Troubleshooting
CAUTION:
This information is included primarily for reference. Chart
recommends any advance troubleshooting or RTD calibration be done by Chart
personnel or a Chart-authorized distributor.
Summary of Contents for MVE Fusion
