8
LT6863 (ISS 05)
Flame height adjustment
Once the fire has been started the flame height can be decreased by moving your finger clock wise or
decreased moving your finger anti-clock wise using the selector wheel. Once the desired flame level is set,
remove your finger from the selector wheel to transmit your selection to the receiver. Six flame levels and
a pilot setting are selectable. Press whilst the display is active to display the current flame level.
Turn off (shut down)
To turn the appliance off, press and hold down until the progress bar has completed. If the is released
before the progress bar has completed the operation will cancel.
Mode select
With the fire running on manual operation you can access three further “modes”. Press for “mode”. Use
the selection wheel to cycle through the three options, “Auto”, “Sleep” and “Light”. Press to select
“Auto” or “Sleep”
Sleep:- Use the selector wheel to choose from the available time range of 5 minutes to 1 hour 30 minutes.
Once the desired countdown time has expired the appliance will turn off. By pressing the button during
the countdown will cancel the countdown timer if required.
Note: The handset contains a sensitive temperature measurement device. To achieve the best
thermostatic efficiency do not place the handset near the heat source, avoid covering, direct sunlight or
near a draft or open window etc. Place the handset at a midpoint in the room or area being heated. Allow
5-10 minutes for the handset to stabilize if subjected to extremes of temperature.
Summary of Contents for Infinity 780 BF
Page 30: ...30 LT6863 ISS 05 ...
Page 31: ...www charltonandjenrick co uk 31 LT6863 ISS 05 ...
Page 32: ...32 LT6863 ISS 05 ...
