C3060A
v1.0, C3060B V1.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 7S LiPo, 8S LiFe battery
1~60Amps 1500W max.
www.chargery.com
page
7
total
19
Auto mode operation instructions
When you need charge same one battery repeat, you can set up Auto Charge is yes (Only for
C3060B), the charger will charge automatically next time, need not setup any parameters. At AUTO
charge, press Knob button shortly stop charging at any time, and press it again start to charge. Or
during charge, disconnect battery stop charging, and connect it, start to charge again automatically.
When need to charge new battery at different parameters, disconnect battery at AUTO interface,
press Knob button for 3 seconds alternate idle interface, the charger will work at intelligent operate
mode, all parameters can be setup in this mode.
for more details about auto mode, Please watch the video on
http://www.chargery.com/Video/C3060_Automode.mp4
.
