C3060A
v1.0, C3060B V1.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 7S LiPo, 8S LiFe battery
1~60Amps 1500W max.
www.chargery.com
page
6
total
19
7.
Setup the charger work at Auto mode (only for C3060B)
,
Finish all charge settings, alternate Auto charge YES and press Knob for 3 seconds, the charger will
start to charge, and work at Auto mode in future till disable it.
When the charger work at Auto mode, what you need to do is connect the AC power and battery to
the charger. The charger will operate at last settings.
On Auto interface, press Knob for 3 seconds alternate to Idle mode.
If need not charge as last settings, pleaser set up Auto Charge is NO
8.
During charge, many charge information is displayed as below
9.
Similar with LiPo charge setup, you can setup LiIo, LiFe, LiTo, Pb battery and NiMH/NiCd.
10.
At any time Press
knob
shortly stop charging. The charger will work at idle mode to save power
consumption. Generally you needn’t disconnect it from AC outlet, because it only consume under
1W power at idle mode.
Tips
All parameters will be remembered by the C3060A/B till next change
.
Choose battery type, and press knob for 3 seconds start to charge at last setup
Battery voltage
Charge current
Capacity charged
Charge time
Internal temperature
Cell count, Battery Type, Charge status
