19
English
6 Configuration
Once the electrical installation has been completed, Charge Amps
Amp Guard needs to be properly configured.
6.1 Connect to the Charge Amps Amp
Guard Wi-Fi hotspot
IMPORTANT!
Only 2.4GHz Wi-Fi is supported.
The Wi-Fi hotspot is only active for 10 minutes after power up.
To restart Charge Amps Amp Guard, see chapter Reset.
1. Connect to the Charge Amps Amp Guard Wi-Fi hotspot using
a smartphone, tablet or a computer. To avoid conflicting Wi-
Fi, set to airplane mode, turn on Wi-Fi, then connect to the
hotspot.
2. The network name, i.e. the SSID, is AG_******* (* = The last 7
digits/letter of the Charge Amps Amp Guard’s serial number).
The serial number can be found on the front label of the
Charge Amps Amp Guard (the one with a QR-code) and on the
front page of the Quick Guide.
Enter the Charge Amps Amp Guard PIN as the Wi-Fi password
to sign in to the Wi-Fi hotspot.
The PIN is an 8-digit code that can be found on the Charge
Amps Amp Guard front label and on the front page of the
Quick Guide.
