Char-Broil Gourmet 463251913, Product Manual

Page: 22 / 40

8a
17
Insert sideburner into left shelf. The stud on bottom of burner fits into rear small hole in sideburner drip pan, shown A .
Secure burner to siderburner drip pan with one Wing nut, shown B . Under sideburner shelf, attach sideburner ignitor wire
to electrode. Make sure burner tube engages sideburner valve, shown C .
Wing nut
electrode
Electrode
ignitor wire
Sideburner drip pan
sideburner drip pan
Sideburner
Stud
burner tube
A
B
C
valve
Control knob
Top
#8-32x3/8" screw
Valve stem
Sideburner knob bezel
Sideburner valve bracket
Sideburner
fascia
Screws and Washers removed
from valve bracket
Note: Use left and right
holes on fascia to attach
valve bracket.
Note: Use upper and lower holes on
fascia to attach bezel.
Note: Make sure to set the bezel with
the longer slot at the top
First, remove the two screws and washers from sideburner valve bracket. Position sideburner valve bracket beneath
sideburner fascia so that valve stem comes through larger center hole in fascia. Align the holes on valve bracket with left
and right holes on fascia. Secure using screws and washers that were removed from valve bracket.
Next, place sideburner knob bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower
holes on fascia. Attach knob bezel to fascia using two
#8-32x3/8” screws. Press sideburner control knob onto valve stem.
16
22