Char-Broil Gourmet 463251913, Product Manual

Page: 19 / 40

12
13
Inside of the cart, connect the wires from burner electrodes into the back of Electronic Ignition module. Total (5)
connections.
Connect the two wires [(a) and (b)] from switch wiring harness into the back of Electronic Ignition module. Total (2)
connections, shown
A .
Note: Switch terminals are larger than electrode terminals and should only be installed in location shown as (a),(b).
Unscrew the cap and nut from electronic ignition module. Attach electronic ignition module to the cart right side panel with
the nut, shown
B .
Insert AA battery into ignition module, negative (
-
) end first. Then put on the cap, shown C.
1
(a)
(b)
2
3
4
5 Electronic ignition module
+
-
Cap
AA battery
Right side panel
C
A
Electronic ignition
Tie wrap
Right side panel
Nut
module
NOTE: Wires omitted for
clarity of illustration
Attach right side fascia to right side shelf using four #10-24x3/8" screws, shown A .
Insert flange on right side shelf into side shelf brackets on right side of firebox, shown B .
#10-24x3/8" screw
A
B
Right side shelf
Right side fascia
Side shelf bracket
19
B